


Velotric Discover 2 Step-Through Commuter Electric Bike
Discover 2 ST — Enjoy Effortless Joy and Power
The Velotric Discover 2 is where comfort meets power. This is designed with comfort as its topmost priority. It features 80mm hydraulic fork, 220mm saddle, adjustable stem, ergonomic grips, quality frame, excellent braking, and integrated lights. On top of that, it is equipped with SensorSwap™️ technology — a trademarked feature by Velopower. This allows the rider to swap between torque and cadence sensors.
Best Features
![]()
Motor
750W/75Nm |
![]()
Battery
706Wh |
![]()
Brakes
180mm |
![]()
Technology
SensorSwap™️ FindMy™️ |
![]()
Max Speed
Up to 28mph |
![]() Range
Up to 75mi |

Delve Into Discover 2
Check out these features

Step-Through Frame
Mount with so much ease with a step-through frame that is as low as 15.35in
Spare no compromise in terms of comfort
75-mile range can be too stressful for the body, but not with a bike designed for maximum comfort and support — just like Discover 2.
750W Motor with 75Nm Torque
Conquer up hills and beat the speed. This high-performing motor with 750W capacity and torque of 75Nm that can give you power to do every possibilities.
706Wh for Optimum Range
Enjoy the 75-mile distance that comes with Discover 2's 706Wh battery
Adjustable Stem
This feature adds flexibility on the bike's height. It allows the rider to have the handlebars on a specific height to optimize their desired position.
EXPLORE THE ANATOMY OF VELOTRIC DISCOVER 2
SPECS SHEET
750w, 75 Nm
48V, 705.6Wh, IPX7, Certificated by UL 2271
Throttle Range 60 Miles
Pedal Assist Range 75 Miles
3.5" Full color, high brightness, Bluetooth, adjustable angle
Kenda 27.5x2.4" eBike puncture resistant tires
Double-walled aluminum alloy
NOVATEC Aluminum Alloy, 15x110mm thru-axle
Triple-Butted Aluminum Alloy
Hydraulic suspension 80mm travel with Lock-out, 15x110mm thru-axle
Chainrings 46T, narrow wide chainring
Crankset Aluminum Alloy, 170mm
Freewheel 8-speed, 11-32T
Chain KMC 8-speed
Rear Derailleur SHIMANO 8-speed
Shift Lever SHIMANO 8-speed
Tektro Hydraulic Disc Brake with power cutoff on aluminum lever
Aluminum Alloy, Φ31.8mm, 680mm (R)/700mm (L)
VELOTRIC urban comfort ergonomic seat
Rear Light Brake highlight, turn signal, rear light steady/flash, integrated with rear rack
Front Light Light sensing 130Lux high-output integrated LED, adjustable angle
Aluminum Alloy, included, rear mount
66 lbs

EVERY RIDE IS JOYRIDE
Absorb impact with 80-mm hydraulic fork and lockout feature

EVERY RIDE IS JOYRIDE
A vacuum molded 220mm wide saddle, perfect for long rides

EVERY RIDE IS JOYRIDE
Your wrist is supported because of ergonomic grips and stem
EVERY RIDE IS JOYRIDE
Absorb impact with 80-mm hydraulic fork and lockout feature
EVERY RIDE IS JOYRIDE
A vacuum molded 220mm wide saddle, perfect for long rides
EVERY RIDE IS JOYRIDE
Your wrist is supported because of ergonomic grips and stem



What is SensorSwap™️?
Get a bike where you could freely switch between two types of sensors — torque and cadence. Freely use torque sensor on challenging trails and switch to cadence on flat terrain for an easy and enjoyable ride.

TORQUE SENSOR

CADENCE SENSOR
Velotric Discover 2 Blends Into Your Dream Life
©️ Photos from Velotricbike.com



Frequently Asked Questions
What you need to know about your Velotric Discover 2
Is Discover 2 Easy to assemble?
Velotric electric bikes are quite easy to assemble, which may only take 15-25 minutes.
How long does it take for the battery to be fully charged?
The batteries usually take about 6 hours to be fully charged.
How to clean the Discover 2?
The Discover 2 has an ingress protection rating of IPX6, which means it can be cleaned even with a pressure washer. It also means that it can be used during heavy rainfall. This is the Velotric standard for all their electric bikes. Check out their full collection below.
How to switch between sensor modes?
Velotric App: When the bike is stationary, you may check and switch via the Velotric App.
Display: Long-press the Mode (M) button. Ensure that the mode has changed by looking at the indicated mode in the display.
When should I switch sensor modes?
The sensor modes in Velotric's SensorSwap™️ are torque and cadence sensors. Torque sensor is an ideal mode for variable-speed cycling because it is intuitive, which makes it helpful for uneven and challenging terrain. Meanwhile, Cadence Sensor is ideally used for longer or more relaxed cycling, making it the preferred mode for urban cycling. They can be used interchangeably, but one is just a smarter choice over the other.
A City electric bike is characterized by tires that let you travel swiftly, a saddle that supports comfort, frame that is angled to support upright posture, and equipped with fenders, lights, and racks that is essential in day-to-day commuting
Yes, especially because of the electric assist. It makes riding uphill easier, but this may also require more power and may affect your range.
Yes, they are built to survive light rain. However, it is important to avoid too much exposure when it comes to electric bikes — high-pressure water, submerging in water, improper storage, and extreme temperatures. Those factors, just like heavier rain, may affect your electric bike along the way.
Most City Electric Bikes are made to fit an urban type of living, which is why they are almost always designed with front or rear racks that are capable of carrying groceries. With the right accessories, you can even carry or haul more than just groceries. Check our accessories here.
Yes. The electric assist in pedaling allows beginners to ease into cycling, which can help improve the confidence of the rider.
Yes. An electric bike can go up to 32 kph, while a standard bike usually have maximum top speed of 19 kph